GEA Procomac extends running time for low acid aseptic filling lines
Unibloc ECOSpin is the 5th generation of GEA Procomac wet PAA-based aseptic filling lines
GEA Procomac, of Parma, Italy, a leader in aseptic filling, has extended the running time between cleaning cycles for its low acid filling lines allowing them to run continuously for up to 120 hours.
The firm says this reduces costs, increases productivity and reduces the environmental impact of the filling lines.
The filling of low acid products into PET, such as milk and milk-based drinks, when performed aseptically, traditionally requires a cleaning/sterilisation cycle every 72 hours.
The aseptic filling systems from GEA Procomac, using spray PAA sterilisation technology, can run continuously for up to five days.
Although many manufacturers claim to be able to approach this running period with high acid drinks, such as fruit juices, none has achieved the same level of productivity with low acid products, the firm says.
GEA Procomac says that increasing the line availability in this way achieves ten additional production days per year, significantly reducing the cost per bottle and having a positive effect on its environmental impact. The number of sanitation cycles is reduced by 40% thereby reducing the downtime, the cost of maintenance and the chemicals used.
Following a trial conducted over a period of 12 months on an existing installation, the system has achieved validation for 48,000bph while filling milk-based products. Currently, three filling lines manufacturing peanut milk and tea with milk are running under extended running time validation conditions on a 120-hour continuous basis.
GEA Procomac estimates that in 2011 close to 50% of the filling of milk-based products into PET bottles worldwide was performed on its machines.
Subscribe now to Cleanroom Technology to get unrestricted online access to our exclusive content and receive our high quality magazine every month.